-->

Monday, October 11, 2010

How to Program Subaru Impreza Keyless Entry Remote

I decided I wanted another keyless remote for my car so I bought me a spare remote on EBAY but it needs to be programmed. It cost so much to buy it from the Subaru Shop so decided to Ebay for part 88036AE060 . I have checked several sites for the instruction how to program Subaru Impreza Keyless entry remote but only this certain instruction works. I just wanted to share this instruction I followed to program my Subaru Impreza keyless entry remote and saves you time to look around for instruction and  money from going to shop.  Works on Alpine system with part number: 88036AE060
Unlock all doors, foot on brake, all doors closed. Cycle key quickly but carefully on-off approximately 10 times until the car honks one time.
(Do not turn the key far enough to start the car, just to the 'on' position so the dashboard lights up.)

When the horn honks, open and close the driver's door, press any remote button and that's it.
******To program another remote, Quickly open and close the driver's door again and push a button on the 2nd remote. That's it.

When you're done, remove the key and the horn should honk 3 times. You're all set.
Sometime it takes more than 10 on-offs to set program mode. Open/close the door, lock/unlock etc, wait 10 minutes, then try again.
PLEASE TAKE TIME TO WRITE REVIEW TO ALEXA IF THIS TUTORIAL WORKS FOR YOU, THANKS

Review http://www.jh3riz24.net on alexa.com