jH3Riz24 TiPs and ReViews

Simple Trick to Use Bluetooth on SKYPE Calls with Android Device

2012-03-17T11:39:00.002-07:00

This TRICK I have personally tried using Samsung Galaxy Skyrocket S2 to use my bluetooth but I came across the same problem, I even got AD2P bluetooth headset hoping to use bluetooth headset when using skype but big disappointment when all my media sound work perfectly but during skype call, it just connect but doesn't work. So I managed to trick skype audio (making sure bluetooth is already paired and connected.)
This works for me but it still uses the devices mic not the bluetooth. Tested on my Samsung galaxy skyrocket S2 using AD2P bluetooth headset (Motorola HX550). I tried the regular bluetooth (non AD2P and it does not work)

#1 exiting skype on task manager

#2 plug the headset/mic in the jack (to trick skype that is is using the headset)

#3 now make a skype call ( you can unplug the headset once you see it ringing under headset *icon headset and it should not show that your skype call is on bluetooth mode, it should be on earpiece *icon once headset is unplug )

Please share link to facebook or tweet if this works for you.

HOW TO HIDE FOLDER IN PC

2011-10-08T19:55:00.001-07:00

It is not very often that you want to hide a file in your pc but for some of those that wanted to know how, this is the post for you.
1. Right click the folder or file that you want to hide and click "properties". Refer to photo below.

2. Once property window pops out, all you need go to attibutes and check mark "hidden" box . click "apply" and then "ok" . This will hide the floder/file. Goodluck!

How to Disable Auto RUN Programs

2011-08-25T12:37:00.003-07:00

It is very common that we make some programs run automatically but later we change computer use or we simply change our mind and decide to not run the program automatically. Not to mention some of the programs by default , run without asking your permission. Here is a simple way to change the settings and stop those programs from running automatically.

1. Open "RUN" dialog box by clicking the Windows Logo+R and click RUN .

2. Type in "misconfig" in the dialog box. (In some computers, it will open a user control warning....just click "CONTINUE")

3. New window "SYSTEM CONFIGURATION" will open and click "SERVICES" tab. It will show all the programs that are set to run automatically.

4. UNCHECK the program you want to stop running automatically. Click "ok" and that's it. It will ask you to restart in order for the latest to work or restart later, just pick your choice and there you go, the next time you start your PC, it will stop the programs you set to stop running automatically

PLEASE TAKE TIME TO WRITE REVIEW TO ALEXA IF THIS TUTORIAL WORKS FOR YOU, THANKS

How to get rid of fake windows 7 security virus alert

2011-08-21T08:49:00.003-07:00

Yes this just happened last week with my girlfriend WINDOWS 7 netbook and worked for me without having to download software. How to remove Fake virus alert are those irritating fake virus scanners that starts automatically and looked like the image I posted on right. It usually blocked you from using your browser , unable to open task manager and inability to scan or open your anti virus program. If you suffer from this you will need to read further , it is very easy how to remove Virus Alert and hope it will help others too.

All I did was reboot my pc and try logging in on "safe mode with networking". You can do this usually on windows 7 netbooks I try to repeatedly clicking the f7 button before windows start up and it will send you to a windows option and click "f8" for advance options. Now it will send you to window that look like the picture below.

Now click and choose to log in "Safe Mode with Networking" . Once WINDOWS is done loading , go to CONTROL PANEL and click "System and Security". Your window should look like

Click "Recover system settings on your computer"

It will open a window that look like below and click "NEXT"

You may choose to click "show more restore points" and choose a date back before you had the problem. It will open a "CONFIRM YOUR RESTORE POINT" window, just click "finish". Your system will try to restore ......DO NOT DO ANYTHING, just let your computer do the job UNTIL IT RESTART.

After it restarted, it should confirm that your system restore completed successfully.

PLEASE TAKE TIME TO WRITE REVIEW TO ALEXA IF THIS TUTORIAL WORKS FOR YOU, THANKS

How to Program Subaru Impreza Keyless Entry Remote

2010-10-11T22:17:00.009-07:00

I decided I wanted another keyless remote for my car so I bought me a spare remote on EBAY but it needs to be programmed. It cost so much to buy it from the Subaru Shop so decided to Ebay for part 88036AE060 . I have checked several sites for the instruction how to program Subaru Impreza Keyless entry remote but only this certain instruction works. I just wanted to share this instruction I followed to program my Subaru Impreza keyless entry remote and saves you time to look around for instruction and money from going to shop. Works on Alpine system with part number: 88036AE060

Unlock all doors, foot on brake, all doors closed. Cycle key quickly but carefully on-off approximately 10 times until the car honks one time.
(Do not turn the key far enough to start the car, just to the 'on' position so the dashboard lights up.)

When the horn honks, open and close the driver's door, press any remote button and that's it.
******To program another remote, Quickly open and close the driver's door again and push a button on the 2nd remote. That's it.

When you're done, remove the key and the horn should honk 3 times. You're all set.
Sometime it takes more than 10 on-offs to set program mode. Open/close the door, lock/unlock etc, wait 10 minutes, then try again.

PLEASE TAKE TIME TO WRITE REVIEW TO ALEXA IF THIS TUTORIAL WORKS FOR YOU, THANKS

How To Change the Logo or Icon on Your Address Bar for Blogger.com account

2010-08-18T20:50:00.011-07:00

I have few people that says it don't work anymore. I actually went to few blogs talking about Blogger.com not allowing to customized the favicon on address bar or the title bar. Well, I've tried few codes and sure is,there are codes that did not work but after different trial and error, I found a code with lil editing, it worked for me. as you can see on my title bar has custom logo.It is simple yet takes few steps to follow . First you need to create a favicon or convert an image into .ICO extension (favicon- is short for favorite icon , URL icon ,website icon, shortcut icon) These sites will make you generate the favicon:

Site 1 IconJ is the answer to all favicon needs, it converts image to favicon and it can also host your favicon and you don't need to sign up . After you upload the image it will actually generate you the CODE . Choose "Host It at IconJ.com: (Direct Link) ." Copy the code .

Now log in to you Blogger.com account andedit your template html (it is a good habit to save and back up your template when u edit)
Find </head> using "Ctrl / Command + G" .Paste the code you copied from IconJ just before the </head> I just like to paste it here because it is easy to find and I dont have to mess with lots of <meta> tags.

"Save Template" , now when you visit your page, you should see the custom icon on title bar or the address bar.

Site 2. FAVICON.CC will make you create your own favicon and convert regular image into favicon format. SO this is still nice site to use if you want to make your own favicon then use ICONJ as your Favicon Host.

Site 3. Favicon Generator and Gallery also let you generate a favicon but the difference is you could also submit it to their gallery and they would add your icon as part of their change link system.
PLEASE TAKE TIME TO WRITE REVIEW TO ALEXA IF THIS TUTORIAL WORKS FOR YOU, THANKS

How to Put YAHOO Status on Your Blog

2010-08-14T12:34:00.023-07:00

How To Add Yahoo Messenger (YM) Status on your Blog

CLICK STATUS CHART TO ENLARGE

I just got an idea what to share today. When I get few questions that usually triggers my brain hehehe. That is why I so appreciate your querries because if it interests you, am sure it is important. How to put YM status on your blog and users also able to send messages directly to your yahoo messenger (just like I have on my top right widget part of my blog)...It is simple just copy the code below:

FOR WORDPRESS and BLOGGER.COM try this code

# Change YOUR_YM_ID with your own Yahoo ID
# Change t=1 to different number , please refer to chart for the image and number code.

HOW TO CLAIM SITE IN ALEXA FOR BLOGGER.COM USERS

2010-07-23T02:09:00.072-07:00

This is just illustrated instruction how to claim your BLOG in ALEXA.COM

did some experiment and it worked.If you are using BLOGGER.com.I am sure fellow

bloggers like me have same question , we can't upload in

root directory in blogger.com. I only see "MANUAL VERIFY"

HERE'S MY TRICK:

1. Log in to ALexa.com and click "for site owners".

2. It will show Services but go down to "Manage your site" and click "CLAIM YOUR SITE".

3. Type in your BLOG URL in the box and then Click ".CLAIM YOUR SITE Make sure you type in the full URL address.

4. It will show some code . Choose option 2 "VERIFY MY META TAG" . COPY the META Tag

5. Log in to BLOGGER.COM, click "EDIT DESIGN" and make sure you are on
"EDIT HTML" mode then insert the META TAG you copied from ALEXA.COM right after "<head> " (section check illustration above)

6. Click "SAVE TEMPLATE"

7. Now go back to Alexa.com page again and CLICK " Verify My MetaTag"

8. Confirmation window that you made it. You should be done!! I hope this works for you.

9.If you find this helpful please WRITE ME A REVIEW TO ALEXA